Pulsed electronic loads powered from high-voltage energy storage capacitors present power conversion designers with several challenges, including controlled charging of large capacitive loads, maintaining precise peak charge voltage and providing low-level electronic control interfaces immune to high system noise levels. With more than 30 years of experience in this field of power conversion, Wilmore offers off-the-shelf and OEM “building block” Capacitor-Charging Converters and Flashlamp Simmer Supplies. Applications include pulsed lasers, flashlamp tower-obstruction lighting and other pulsed loads for industrial and laboratory use.
A few product examples are shown below. Pulsed-load applications tend to be highly individualized, and the majority of our capacitor-charging converter customers work directly with our technical staff to customize our converter and interface “building blocks” to a particular requirement. To discuss your application, or to request complete product specifications, technical data or pricing, please contact us using the form provided on this Web site or by telephone, fax, mail or e-mail at the location shown on this page.
Products
DC-DC Converters for
19"/23" Equipment Racks
DC-DC Converters for
Mobile Applications
DC-AC Inverters and
Uninterruptible AC Power
Capacitor-Charging
Converters and Flashlamp
Simmer Supplies
Custom-Designed and
OEM Power Supplies
Applications
Wilmore Electronics Co., Inc
PO 607 US 70-A East
Box 1329
Hillsborough, NC 27278
(919) 732-9351
fax (919) 732-9359
info@wilmoreelectronics.com
©2001-2008 Wilmore Electronics Co., Inc. All rights reserved
• Energy Delivery Rates up to 650 Joules/Second
• Input Voltages: 24 and 28 Vdc
• High Repetition Rates with Constant Power Charging
• Maximum Output Voltage: 500 to 1600 Volts
• Modular “Building Block” Construction
• Energy Delivery Rates up to 1200 Joules/Second
• Input Voltages: 230 Vac, 300 Vdc
• High Repetition Rate with Constant Power Charging
• Maximum Output Voltage: 400 to 2500 Volts
• Modular “Building Block” Construction
• Simmer, Trigger and Conduction of Flashlamps
• Input Voltages: 24 and 28 Vdc
• No External Ballast or System Components Required (other than trigger transformer)